Abbott i-STAT Alinity Operation Manual page 36

xxxvi
Term or Acronym
Operator List
Operator Settings
Patient List
Patient Settings
Patient Temperature
PEAPv0
PPID
Profile
PSK
Publish
QC
QC Auto Fail Comment
QCC
Quality Settings
Ranges
i-STAT Alinity — System Operations Manual
Definition
List of certified operators. Cannot be enabled unless a POC data
management system or any other system that certifies operators
and sets operator permissions is being used.
Group of features used to define the behavior of an instrument.
Selections made in this setting group are considered basic and
common to most instruments within a healthcare organization. It is
also possible to make selections that are applicable to an entire
healthcare organization. This is one of five categories that is
required to build a profile.
List of registered patients in a healthcare organization. Cannot be
enabled unless an Admissions, Discharges, and Transfers (ADT) feed
is being used.
Group of features used to define the behavior of an instrument.
Selections made in this setting group are considered basic and
common to most instruments within an HCO. It is also possible to
make selections that are applicable to an entire HCO. This is one of
five categories that is required to build a profile.
Patient's temperature during the time of testing. The temperature
entered here will be used to calculate patient temperature-adjusted
blood gas results.
Protected Extensible Authentication Protocol, Version 0
Positive Patient Identification
There are five required categories: General, Patient, Operator,
Analyte and Quality Settings. The remaining five are optional.
Profiles are assigned to an instrument through USB. See instructions
in the Manage and Assemble Profiles section of this document.
Pre-Shared Key wireless authentication type
To make available for use after settings are defined
Quality Control
Option to prompt an operator to enter a comment when QC results
are out of range when using QC pass/fail using eVAS
Quality Check Code
Group of features used to define the behavior of an instrument.
Consider basing quality settings on the number of instruments in a
department requiring QC at the same time. Department specific
quality control plans may be defined using IQCP guidelines. This is
one of five categories that is required to build a profile.
Healthcare organization-defined ranges for reference, action and
reportable.
Art: 747018-01 Rev. H
Rev. Date: 02-Nov-2022