Abbott i-STAT Alinity Operation Manual page 37

Term or Acronym
Repeat Test
Result Notes
ReVAS
Reviewer Name
Selection List or Text Box
SN
SSID
STATNotes
Summary
TKIP
TLS
Training Settings
TTLS
UDP
Units
USB
User Defined Message
User Role
i-STAT Alinity — System Operations Manual
Definition
Option to prompt an operator to repeat a test
Prompts displayed on the screen after results are displayed.
Designed to be used if post-analytical actions or comments are
needed. They can be mandatory or optional. The notes will be
transmitted along with the results to the data manager.
Electronic Value Assignment Sheet for customers in Germany.
Healthcare organization-designated connectivity manager for the
defined vendor. Found in the Connectivity Settings category. This is
a required response.
User-created list of responses.
Serial Number
Service Set Identifier
Prompts displayed on the screen during the test cycle. Designed to
provide information about the patient's status at the time of
testing. STATNotes are used primarily, though not exclusively, for the
recording of ventilator parameters. They can be mandatory or
optional. The STATNotes will be transmitted along with the results
to the data manager.
Display of all details within a Profile or Category
Temporal Key Integrity Protocol wireless network authentication
type
Transport Layer Security
Group of settings used to create the screens that display during a
training event.
Tunneled Transport Layer Security
User Datagram Protocol
Standard of measurement for an analyte
Universal Serial Bus
Message created to display on the instrument before any selections
are made.
There are 3 user roles in the CWi. The roles define what CWi
privileges each user has.
Art: 747018-01 Rev. H
xxxvii
Rev. Date: 02-Nov-2022