Communications - Abbott i-STAT Alinity Operation Manual

Communications

These settings control the communication method and action taken if upload fails or is delayed.
Result Auto
Transmit
Power Down
Communications
Wireless
Communications
When finished, choose from the options shown at the bottom of the screen:
• Previous to go back to the previous screen
• Discard to undo changes
• Finish Later to create a draft
• Next to open the next tab
i-STAT Alinity — System Operations Manual
Transmit all result or results to data manager once displayed on the instrument
and after all required entries are completed or after the inactivity time is
reached.
Select the action to be taken for data transmission when the instrument powers
down:
None
Unsent Results
All (Unsent Results, Lists,
eVAS)
Enables wireless communication for the i‑STAT Alinity instrument. The default
setting is enabled. Uncheck the box to disable. Wireless communication is not
fully enabled until the instrument is configured using the NCi application. See
the NCi section of this manual for additional instruction.
Art: 746300-01 Rev. N
No data will be communicated or transmitted from
instrument to data management system or
network service when the instrument powers
down.
Unsent results will be transmitted to the data
management system when the instrument powers
down.
All unsent results, Operator/Patient/Cartridge
Lists, if enabled, and eVAS, if new version
available, will be communicated and transmitted
to or from the data management system and
network service when the instrument powers
down.
153
Rev. Date: 02-Nov-2022