Statnotes Category - Abbott i-STAT Alinity Operation Manual

209

STATNotes Category

STATNotes are used to obtain relevant patient information, such as respiratory parameters, at the time of
a test. Much like profiles that are built with categories, STATNotes are built using sets. Additionally, sets
are built with items. Items are what the operator sees on the instrument. Items require responses. Items
are assigned to a set. This is performed in the Manage Set section. Continue through the process until
the set is published. Once a set is published it is available for assigning to a cartridge type when building
a STATNote. The information below will explain the process in detail.
Items listed with names that begin with "APOC" are predefined. Details of each APOC predefined item
can be viewed by clicking on the item and then clicking on View. If the predefined item satisfies the
needs of the customer, no further action is required and the item is ready to be added to a set. If
changes to the APOC predefined item are required, follow the instructions for Create from Existing in
the General Settings section of this document.
Begin building an item. Click on Manage and Assemble Profiles > STATNotes > Manage Items > Create.
The following item types are available: Data Entry, Selection List, Selection List with text box, Delivery
System, Mode and Patient Temperature. Each of these choices is detailed below.
Rev. Date: 02-Nov-2022
i-STAT Alinity — System Operations Manual Art: 746300-01 Rev. N