Basic Functions - Abbott i-STAT Alinity Operation Manual

150

Basic Functions

The Basic Functions tab includes settings such as volume, action taken when the i‑STAT memory is full,
and transmitting results.
On Basic Functions screen you can define settings for these features:
Sound
Enable Sound
Volume Levels
Inactivity
Results Present, Data Entry
Complete
Results Present, Data Entry
Pending
Training Mode Active
Software Updates
Software Expiration Warning
Require Electronic Simulator
test after software installation
Update and install software
from Server
i-STAT Alinity — System Operations Manual
Unselect the checkbox to turn sound off. This will disable all sounds.
With sound enabled, you can set the volume for these functions. From
the drop down box, select a value from 0 to 100%. Selecting 0 turns
sound off. The default is 100%. You can also adjust the sound using the
slider bar. Click and drag the dot left or right along the "ruler" to raise
or lower the volume.
Basic Functions
Transmitting
Touch Screen
Barcoding
Results Display
The instrument will power down after the chosen number of seconds
have elapsed.
The instrument will power down after the chosen number of seconds
have elapsed.
The instrument will power down after the chosen number of seconds
have elapsed.
Number of days prior to the expiration of the instrument software to
display a warning message on the screen. Allowable values are 0
through 30. The default is 15 days. The following is an example of the
message displayed:
Software expires on:
31DEC2020
Testing will be disabled on that date.
Contact the system administrator
After the software update, select this option to lock out the
instrument to prevent it from being used until the electronic simulator
test is performed and passed.
After the software update is downloaded from the Abbott Managed
Server, or the SDi, the instrument will install the software without
requiring the installation confirmation.
Art: 746300-01 Rev. N
Rev. Date: 02-Nov-2022