Abbott i-STAT Alinity Operation Manual page 52

14
View Action Ranges and Analyte Info
Instrument Status:
Quality Options: Quality Control
i-STAT Alinity — System Operations Manual
An individual button is displayed for each analyte available for
the i‑STAT Alinity system. Those buttons greyed out require
activation via a customization profile or are not available at
this time. Shown with the analyte is the unit of measure. Units
of measure maybe modified via a customization profile or on
the instrument via More Options > Instrument Options >
Instrument Settings > Set Units
Touching an active analyte button displays a second page of
information:
Measurement range - Default is displayed unless a new range
is set via a customization profile.
Critical Test - Default of no will be displayed unless modified
via a customization profile.
Touching the View Reference Range button will reveal the
ranges set for this analyte via a customization profile.
Touching View Action (Critical) Ranges will reveal the ranges
set for this analyte via a customization profile.
Important information such as firmware version, barometric
pressure and profile name are listed here.
Perform When liquid QC testing is not scheduled via a customization
Unscheduled QC profile or if an additional liquid QC testing event is desired,
this is the testing pathway. Follow the prompts on the
screen to perform testing.
Scheduled QC If liquid QC testing has been set via a customization profile,
this is the testing pathway. Follow the prompts on the
screen to perform testing.
Perform Cartridge This feature allows liquid control testing to release
QC cartridges, based on lot number, for patient or proficiency
testing. This method of QC testing must be set up via a
customization profile as well as activation in the data
management system.
Art: 745527-01 Rev. N
Note: No ranges are the default.
Note: No ranges are the default.
Rev. Date: 13-Oct-2022