Abbott i-STAT Alinity Operation Manual page 235

Cal Ver Test Settings
Calibration Verification (Cal Ver) test settings can assist the operator and support compliance with
regulatory agencies.
Cal Ver Test Settings
Pass/Fail Determination
Results Display Format
Fluid Settings
Only Allow APOC fluids
Cartridge Help
Display Insert Cartridge Help
i-STAT Alinity — System Operations Manual
Describes the method used to determine the acceptability of Cal
Ver results. Select one of these options:
None Cal Ver Pass/Fail determination is not applied.
Auto via eVAS Automatically determine if the results of a Cal
Ver test passed or failed, based on Cal Ver
ranges from an electronic Value Assignment
Sheet (eVAS or ReVAS) file downloaded to the
instrument. It is recommended that the
instruments are wirelessly connected to the
CWi for automatic eVAS updates. If the
instruments are not connected to CWi, the
eVAS must be loaded onto each instrument
using the USB port on the Base Station.
Manual The operator manually compares the Cal Ver
results to a Value Assignment Sheet
downloaded or printed from the Abbott Point
of Care website at:
www.globalpointofcare.abbott/en/support/
istat-brand/vas-i-stat-alinity.html
on the instrument whether the Cal Ver test
passed or failed.
Determines whether the Cal Ver results displayed on the instrument
are either:
Numeric Cal Ver results are displayed in numeric format.
Suppressed The following symbol <> is displayed next to
each Cal Ver test name in place of the
quantitative (numeric) results. Do not select
this option if manual pass/fail determination is
selected.
Unselect the check box if non-APOC Cal Ver fluids will be used.
Graphics displayed on the instrument screen after all required fields
are complete but before the cartridge is inserted. The cartridge help
screens include the 'collect and mix sample' and 'fill cartridge'
graphics.
Art: 746300-01 Rev. N
195
https://
and indicates
Rev. Date: 02-Nov-2022