Patient Settings Category - Abbott i-STAT Alinity Operation Manual

*Patient Settings Category

This section contains features to customize the patient settings for the i‑STAT Alinity. The Patient Settings
category can be created with the following steps.
Click Patient Settings, then select APOCPatientSettings and click View. The screen displays the
default name APOCPatientSettings, and default values for each feature. Scan through the
APOCPatientSettings and determine if the selections work for the profile being assembled. If they
do then no additional work is needed in this category. The APOCPatientSettings category will be
available in the Manage Profiles section. Use it to assemble the new profile. If the
APOCPatientSettings do not work for the profile being assembled, click Finish to stop viewing.
Click Create and follow the instructions below.
You are prompted to specify a name for the settings and an optional description:
Patient Settings Name
Description
When finished, choose from the options shown at the bottom of the screen:
• Discard to undo changes
• Next to open the next tab
i-STAT Alinity — System Operations Manual
Note: All required categories have a default setting named with the APOC prefix. In
addition, the settings are populated with default values.
Required. Specify a name that is from 4 to 40 characters long and:
• consists only of the following characters:
￮ 0 through 9
￮ A through Z or alphabet appropriate for language (in upper
￮ blank space
￮ underscore ( _ )
• does not begin with the characters APOC (in upper or lower
case)
• is a unique name within this healthcare organization
Optional. Provide any information that helps the user know how or
why the category was named or created.
or lower case)
Art: 746300-01 Rev. N
173
Rev. Date: 02-Nov-2022