Abbott i-STAT Alinity Operation Manual page 56

18
Instrument Options
i-STAT Alinity — System Operations Manual
Synchronize All
Software Installation
Art: 745527-01 Rev. N
Initiate communications with
data management system and
Abbott Managed Server to
synchronize lists (operator,
patient, cartridge) and eVAS/
ReVAS(Germany only) that are
enabled on the instrument.
Install from USB - Follow
prompts on the screen to install
instrument software.
If the instrument does not detect
the Base Station, try the
following:
• remove the instrument and
re-seat it on the Base Station
• check to ensure that the Base
Station is getting power (blue
light illuminated).
If the instrument does not detect
the USB drive, try the following:
• remove the USB and reinsert
• make sure the USB is
formatted (as display
message indicates).
Install Pending - Instruct
instrument to install software
update.
Check for Update - When Abbott
Managed Server connectivity is
set up on the instrument,
touching this button causes the
instrument to check for new
software. If a new version of
software is available, the update
will automatically start
downloading onto the
instrument. See Software
Updates section of this manual
for complete details for
downloading and installing
software via the Abbott
Managed Server.
Rev. Date: 13-Oct-2022