Print - Abbott i-STAT Alinity Operation Manual

Print

This section describes settings for printing from the instrument to the i‑STAT Alinity printer.
Test Result Printout
i‑STAT Printing
Enable i‑STAT printing
When finished, choose from the options shown at the bottom of the screen:
• Previous to go back to the previous screen
• Discard to undo changes
• Finish Later to create a draft
• Publish to make settings available to use in a Profile
i-STAT Alinity — System Operations Manual
Includes or excludes information that will be printed:
Show Reference Ranges
Show Patient Name, Gender,
and Age
Print Operator ID as per the
Operator ID Presentation
setting
Print Operator Name as per
the Operator Name
Presentation setting
Unselect the check box if printing is not allowed or if there are no
i‑STAT Alinity printers available.
Art: 746300-01 Rev. N
Print reference ranges with the results on
the printout.
Note: Reference Ranges must be
defined in Analyte Settings in
order for the reference ranges to
be displayed and available to print.
Print the patient name, gender and age on
the printout.
Note: If PPID is enabled in Patient
Settings the patient name, gender
and age will be available for print.
If prompts for the Patient Name,
gender and age are displayed and
entered on the instrument the
information will be available for
print.
When checked, printouts will contain
Operator ID as per the Operator ID
Presentation settings (see Operator Settings
category). When not checked, printouts will
contain the entire Operator ID.
When checked, printouts will contain
Operator Name as per the Operator Name
Presentation settings (see Operator Settings
category). When not checked, printouts will
contain the entire Operator Name.
Note: Operator list must be
enabled in Operator Settings in
order for the operator name to be
displayed and available for print.
Rev. Date: 02-Nov-2022
163