Summary; Training Settings Category - Abbott i-STAT Alinity Operation Manual

Summary

The Summary is a collapsed view of the settings that can be expanded to provide a complete display. The
Summary should be reviewed prior to Publish. Once the settings are confirmed, click on the Publish
button to finalize them. A Category can be added to a Profile only when the publish status is completed.
When finished, choose from the options shown at the bottom of the screen:
• Previous to go back to the previous screen
• Discard to undo changes
• Finish Later to create a draft
• Publish to make settings available to use in a Profile

Training Settings Category

In the Training Settings Category you can create user-defined training scenarios, to provide a consistent
learning experience for all operators. Every operator will view the same patient information and results,
created in the training scenarios. This will provide standardized training material for the individual
overseeing point of care testing.
To create new category settings, click on Create. The screen displays the default name, TemporaryName.
Change the name, using the specifications shown below:
Training Settings
Name
Description
When finished, choose from the options shown at the bottom of the screen:
• Discard to undo changes
• Next to open the next tab
i-STAT Alinity — System Operations Manual
Required. Specify a name that is from 4 to 40 characters long and:
• consists only of the following characters:
￮ 0 through 9
￮ A through Z or alphabet appropriate for language (in upper or
lower case)
￮ blank space
￮ underscore ( _ )
• does not begin with the characters APOC (in upper or lower
case)
• is a unique name within this healthcare organization
Optional. Provide any information that helps the user know how or
why the category was named or created.
Art: 746300-01 Rev. N
205
Rev. Date: 02-Nov-2022