Abbott i-STAT Alinity Operation Manual page 35

Term or Acronym
General Settings
HCO
HIS
HTTP
IFU
Instrument
IP
IP Address
K2EDTA or K3EDTA Setting
LIS
MAC
Manage Items
Manage Sets
Mode
MSCHAPv2
NC
Network Port
Observations
i-STAT Alinity — System Operations Manual
Definition
Group of features used to define the behavior of an instrument.
Selections made in this setting group are basic and common to most
instruments within a healthcare organization. It is also possible to
make selections that are applicable to an entire healthcare
organization. This is one of five categories that is required to build a
profile.
Healthcare Organization
Hospital Information System
Hypertext Transfer Protocol
Instructions for Use
i‑STAT Alinity instrument
Internet Protocol
Internet Protocol Address. Identifier for a computer or device
Anticoagulant used by the manufacturer of the Laboratory
Hematology Instrument to calibrate. For best agreement of i‑STAT
and hematology analyzer hematocrit results, the i‑STAT
customization setting is selected according to the calibration of the
comparative hematology analyzer (MH-K
Note: This setting is not determined by the purple top tube used for
patient testing in the laboratory.
Laboratory Information System
Media Access Control
Items get responses. An item is an on-screen prompt that requires a
response by the operator. Items are grouped together in sets. Sets
are assigned to a cartridge type (for example, EG7+, CHEM8+).
When cartridge testing is performed, the defined set of items will
be displayed, prompting the operator to enter the information.
Sets are collections of items grouped together and assigned to
cartridge types (for example, EG7+, CHEM8+). When a cartridge
type is tested, the defined set of items will be displayed, prompting
the operator to enter the information.
Ventilator mode for delivery of oxygen
Microsoft Challenge Handshake Authentication Protocol, Version 2
Network Configuration
Part of the system connection that uses a Network Port number to
send or receive service request from a client
Connectivity mapping for test records. Area for entering IP address
and network port for the POC data manager.
Art: 747018-01 Rev. H
xxxv
EDTA or MH-K EDTA).
2 3
Rev. Date: 02-Nov-2022