Unloading A Drive; Figure 40 Unload Drives Screen - Quantum P4000 User Manual

Chapter 3 Operator Commands

Unloading a Drive

Unloading a Drive
Figure 40 Unload
Drives Screen
70
The Move Cartridges command continues until completed unless
you press the
Abort
The command prepares a tape cartridge to be removed from
Unload Drive
a drive by rewinding and ejecting the cartridge. After unloading the
drive, remove the tape cartridge using the
To unload a drive:
1 On the screen, press the
Operator
The GUI displays the
About
System
Control: Unload Drive
Off-line
Standby
Load Port
O
Stop
2 Use the arrow buttons to highlight the desired drive and then press
.
Execute
The GUI displays a
Quantum P4000 and P7000 Libraries User's Guide
button to stop the operation.
Move Cartridges
Unload Drive
Control: Unload Drive
Back Forward
Overview Tapes
Drive 0
Execute
Command In Progress
command.
button.
screen (see figure 40).
Home
Operator
dialog box.
3