Unloading The Load Port; Figure 28 Unload Drives Screen - Quantum P3000 Series User Manual

Figure 28 Unload
Drives Screen

Unloading the Load Port

Back
About
Quantum|ATL
System
Control: Unload Drive
Off-line
Standby
Load Port
O
Use the arrow buttons to highlight the desired drive and then
2
press Execute.
The GUI displays a Command In Progress dialog box.
The Unload Drive command continues until completed unless
you press the Abort button to stop the operation.
The Unload Imp/Exp command moves a tape cartridge from the
load port to an available storage bin. This option must be invoked
after inserting a tape into the load port whenever the library auto
load feature is disabled (see
page 47).
Quantum|ATL P3000 Series User's Guide
Chapter 3 Operator Commands
Forward
Overview Tapes
Drive 0
Execute
Configuring Library Options
Unloading the Load Port
Home
Operator
on
3
53