Unloading A Drive; Figure 31 Unload Drives Screen - Quantum P2000 Series User Manual

Chapter 3 Operator Commands

Unloading a Drive

Unloading a Drive
Figure 31 Unload
Drives Screen
54
The GUI displays a Command In Progress dialog box with an
Abort button.
The Move Cartridges command continues until completed
unless you press the Abort button to stop the operation.
The Unload Drive command prepares a tape cartridge to be
removed from a drive by rewinding and ejecting the cartridge.
After unloading the drive, remove the tape cartridge using the
Move Cartridges command.
To unload a drive:
On the Operator screen, press the Unload Drive button.
1
The GUI displays the Control: Unload Drive screen (see
figure 31).
ATL
P R O D U C T S
System
Control: Unload Drive
Off-line
Standby
Load Port
O
Stop
ATL P2000 Series Automated Tape Library User's Guide
Back Forward
Overview Tapes
Drive 0
Execute
Home
Operator
3