Omron R88D-KTA5L User Manual page 3

Introduction
Thank you for purchasing an OMNUC G5-series Servo Drive. This manual explains how to
install and wire the Servo Drive, set parameters needed to operate the Servo Drive, and
remedies to be taken and inspection methods to be used should problems occur.
Intended Readers
This manual is intended for the following individuals.
Those having electrical knowledge (certified electricians or individuals having equivalent
knowledge) and also being qualified for one of the following:
 Introducing FA equipment
 Designing FA systems
 Managing FA sites
Notice
This manual contains information you need to know to correctly use the Servo Drive and
peripheral equipment.
Before using the Servo Drive, read this manual and gain a full understanding of the information
provided herein.
After you finished reading the manual, keep it in a convenient place so that it can be referenced
at any time.
Make sure this manual is delivered to the end user.
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
Introduction
1