Parts and module
replacement
When ordering replacement parts, provide the following information found on the product license
label:
•
Projector Model
•
Projector Serial Number
•
Manufacture Date
Tools required for service
Before servicing the projector, ensure the following tools and components are available:
The projector toolbox is located inside the service compartment. On the left side of the projector, use the
high security key to open the service access door and obtain the available tools.
•
High security key
•
Long and stubby neck ball drivers—2.5 mm, 3 mm, and 5 mm (provided in the projector
toolbox)
•
2 mm and 6 mm hex drivers
•
8 mm deep socket nut driver
•
13 mm wrench or adjustable wrench (open jaw)
•
Flat-head screwdriver
•
Torque driver
•
Needle nose pliers
•
Magnetiser
•
Side cutters and cable ties
•
Electrostatic protective strap and pad
•
Disposable lint-free gloves (included with optical components)
•
Cloth wipes
Maintenance prerequisites
Before servicing the projector, perform the following tasks.
•
Always power down and disengage all power sources (on page 20) to the projector prior to
servicing.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
30