Parts and module
replacement
When ordering replacement parts, provide the following information found on the product license
label:
•
Projector Model
•
Projector Serial Number
•
Manufacture Date
Maintenance prerequisites
Before servicing the projector, perform the following tasks.
•
Always power down and disengage all power sources (on page 18) to the projector prior to
servicing.
•
Follow all service safety guidelines (on page 13).
•
For detailed breakdown of serviceable modules, see Index of parts and modules (on page
31).
•
When re-connecting harnesses, see the interconnect drawings on www.christiedigital.com.
Tools required for service
Before servicing the projector, ensure the following tools are available.
•
Long and stubby neck magnetic-tip ball drivers—2.5 mm, 3 mm, and 5 mm (provided in
projector toolbox)
•
#2 Phillips
screwdriver
™
•
1.5 mm and 2.0 mm hex screwdriver
•
Slotted screw driver
•
Side cutters and cable ties
•
Needle nose pliers
•
19 mm wrench
•
Magnetiser
•
Electrostatic protective strap and pad
•
Disposable lint-free gloves (included with optical components)
•
Cloth wipes
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright
2020 Christie Digital Systems USA, Inc. All rights reserved.
©
30