Parts And Module Replacement; Maintenance Prerequisites; Tools Required For Service - Christie GS Series Service Manual

Parts and module
replacement
When ordering replacement parts, provide the following information found on the product license
label:
• Projector model
• Projector serial number
• Manufacture date

Maintenance prerequisites

Before servicing the projector, perform the following tasks.
• Always power down and disengage all power sources to the projector prior to servicing.
• Follow all service safety guidelines.
• For detailed breakdown of serviceable modules, see Index of parts and modules.

Tools required for service

The tools required for service are listed below.
• Phillips #1 screwdriver
• Phillips Jewelers screwdriver
• M4 allen key
• M3 socket driver
• M6 socket driver
• M14 socket driver
• Side cutters
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
53