Table of Contents
Advertisement
Parts and module
replacement
When ordering replacement parts, provide the following information found on the product license
label:
•
Projector Model
•
Projector Serial Number
•
Manufacture Date
Maintenance prerequisites
Before servicing the projector, perform the following tasks.
•
Always power down and disengage all power sources (on page 22) to the projector prior to
servicing.
•
Follow all service safety guidelines (on page 12).
•
For detailed breakdown of serviceable modules, see Index of parts and modules (on page
36).
•
When re-connecting harnesses, see the interconnect drawings on www.christiedigital.com.
Tools required for service
Before servicing the projector, ensure the following tools are available.
•
Keys for security locks
•
Convergence Tool Set includes; 2.5 mm driver with heat-shrink tubing (2.0 inch and 6.5 inch
lengths) and an allen key convergence tool—included for access to the red convergence
mechanism
•
Long and stubby neck magnetic-tip ball drivers—2.5 mm, 3 mm, and 5 mm
•
#2 Phillips
™
screwdriver
•
Hex keys: 2.5 mm, 3 mm, 5 mm, 6 mm
•
Nut driver: 5.5 mm
•
Ratchet: 19 mm
•
Electrostatic protective strap and pad
•
Disposable lint-free gloves (included with optical components)
Roadie 4K35 and 4K45 Service Manual
020-101694-03 Rev. 1 (01-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
35
Advertisement
Table of Contents
