Safety Guidelines; Printer Installation; Printer Power Disconnection - Stratasys Objet30 User Manual

Objet30 User Guide

Safety Guidelines

The following general guidelines, together with the instructions provided
throughout this user guide, ensure user safety while operating and maintaining
the system. If the system is not operated as specified, the user's safety
may be compromised.

Printer Installation

➢ Installation and removal of the printer should only be done by qualified
➢ Connect the printer (and the UPS unit) to the electric outlet using a power
➢ The electric outlet should be easily accessible, near the printer.
➢ Never connect the power plug to an outlet that does not have a ground
➢ The following safety statement is followed by translations to Finish,
➢ Leave a minimum of 20 centimeters (8 inches) between ventilation
➢ For Japan: The power cable supplied is provided for connecting the printer

Printer Power Disconnection

➢ When disconnecting the printer power cable, do not touch the metallic pins
DOC-34025 Rev. I
service personnel.
cable that is safety-certified.
(earth) wire, and never disconnect the ground. Doing so might expose the
operator to serious danger from electric shock.
Norwegian, Swedish and Danish, as required by local regulations:
"The machine must be connected to a grounded power outlet."
❒ FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
❒ NO: Apparatet må tilkoples jordet stikkontakt.
❒ SE: Apparaten skall anslutas till jordat uttag.
❒ DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som
giver forbindelse til stikproppens jord.
openings and walls or other objects.
to the AC electric source. Do not use it with other equipment.
in the printer power socket and on the power cable, as this may result in
electric shock.
2 Safety
2-5