Stratasys Objet30 User Manual page 126

Objet30 User Guide
2. After the computer boots, open the Remote Desktop Connection on the
A HASP plug containing a valid product activation key is required on the
printer computer. This is supplied during printer installation or upgrade. If
the application does not open and a HASP message appears, contact your
Stratasys dealer or service provider.
The printer interface screen opens. All monitoring and controlling of the printer
is done from this interface.
Figure 6-3 Printer interface
The time zone on the printer computer is factory-set and it cannot be
changed. Similarly, the computer's clock cannot be configured to
automatically change the time for different seasons of the year. If
necessary, you can change the displayed time manually, but do so only
when the printer is idle.
DOC-34025 Rev. I
server ("host") computer, by double-clicking the Printer computer shortcut.
❒ On the printer-computer desktop, double-click the Objet30 printer icon.
or—
❒ From the Windows Start menu, select (All) Programs > Objet > Objet.
6 Operating and Maintaining the Printer
6-4