Stratasys Objet30 User Manual page 148

Objet30 User Guide
2. Select Run wizard unattended, unless you want more control over the
Note: If you select Run wizard unattended, the wizard automatically turns off
the printer computer at the end of the process.
3. Click Next.
4. In the next screen, indicate whether or not the tray is empty and click Next.
DOC-34025 Rev. I
Figure 6-26 Shutdown wizard, opening screen
shutdown process.
The options in the following screens are enabled only if you selected Run
wizard manually in the opening wizard screen.
Figure 6-27 Tray status
6 Operating and Maintaining the Printer
6-26