Producing Models - Stratasys Objet30 User Manual
3d printing system
Hide thumbs
Also See for Objet30:
- User manual (219 pages) ,
- Operator training manual (236 pages) ,
- Site preparation manual (21 pages)
Table of Contents
Advertisement
Objet30 User Guide
Producing Models
Models can be printed after they are arranged on a virtual build tray in a 3D
printing application. Two such applications are available for preparing trays for
printing on the Objet30 printer:
• Objet Studio
• GrabCAD Print
For information about preparing model files for printing, see the relevant
documentation—
• "Using Objet Studio" chapter in this user guide or Help in the Objet Studio
• GrabCAD Print
The Objet30 printer is capable of printing models with the following maximum
dimensions:
➢ With glossy finish—
➢ With matte finish—
DOC-34025 Rev. I
application.
online
X-axis: 294.00 mm (11.57 inches)
Y-axis: 192.00 mm (7.55 inches)
Z-axis: 148.60 mm (5.85 inches)*
* OrthoDesk printers—100.0 mm (3.94 inches)
X-axis: 293.00 mm (11.53 inches)
Y-axis: 191.00 mm (7.52 inches)
Z-axis: 148.30 mm (5.83 inches)*
* OrthoDesk printers—97.9 mm (3.85 inches)
6 Operating and Maintaining the Printer
documentation.
6-7
Advertisement
Table of Contents
