Setting Model Dimensions - Stratasys Objet30 User Manual

Objet30 User Guide
To change measurement units for a selected object from the standard
toolbar:
1. From the Object menu, select Change Units.
2. In the Model Units dialog box, change the setting and click OK.

Setting Model Dimensions

You can change an object's dimensions by changing its size on the X-, Y-, and
Z-axes, from the Dimensions group on the Model Settings ribbon.
Figure 5-25 Dimensions on the Model Settings ribbon
• If Uniform Scale is enabled, changing the object's dimension on one axis
• After changing a measurement, press Enter or click in another field in the
Note: You can change the height of the objects on the build tray only if this is
allowed by the Objet Studio settings (see "Positioning Objects on the Z-Axis"
on page 5-24).
DOC-34025 Rev. I
Figure 5-24 Model Units dialog box
affects the other dimensions, proportionately.
Dimensions group.
5 Using Objet Studio
5-28