Stratasys Objet30 User Manual page 191

Objet30 User Guide
➢ Continue with "Completing the Replacement Procedure" below.
Completing the Replacement Procedure
8. In the Replace Print Heads screen, select the check box to confirm that you
9. Check that the heads are level and even.
DOC-34025 Rev. I
have replaced the head(s), and click Next.
Figure 6-87 Head replacement confirmation
Then, select the check box in the following wizard screen, and click Next.
Figure 6-88 Installation-check
6 Operating and Maintaining the Printer
6-69