Stratasys Objet30 User Manual page 202

Objet30 User Guide
4. Remove the other four (4) thumbscrews that secure the UV-assembly
5. Disconnect the UV lamp cable and the fan cable.
6. Loosen the two side screws securing the UV lamp assembly to the printer.
7. Remove the assembly, and place it on a flat surface.
DOC-34025 Rev. I
cover, and remove the cover.
Figure 6-107 Disconnecting the UV lamp assembly (top view)
Figure 6-108 UV-lamp-assembly
6 Operating and Maintaining the Printer
6-80