Stratasys Objet30 User Manual page 113

Objet30 User Guide
6. In the pop-up message, confirm that you want to work in offline mode by
When Objet Studio is in offline mode, you can configure it for preparing print
jobs for different printers.
To change the Objet Studio offline configuration:
1. In the Set Printer Features dialog box, select a printer type.
2. Click OK (not "Connect").
DOC-34025 Rev. I
clicking No.
Figure 5-85 offline message
Figure 5-86 offline printer selection
5 Using Objet Studio
5-72