Stratasys Objet30 User Manual page 174

Objet30 User Guide
3. Start the Head Optimization wizard from the Options menu.
4. In the opening wizard screen, click Next to begin.
5. Close the printer cover, and confirm this in the wizard screen.
6. In the following screen, make sure Optimize all print heads is selected, and
DOC-34025 Rev. I
Figure 6-67 Starting the Head Optimization wizard
click Next.
Figure 6-68 Procedure selection
The print block moves into position for cleaning and inspecting the print
heads.
6 Operating and Maintaining the Printer
6-52