Converting Cad Files To Slc Format - Stratasys Objet30 User Manual

Objet30 User Guide
do this in GrabCAD Print or in a third-party STL-repair application (such as
Magics™, by Materialise
For more information, download
PolyJet

Converting CAD Files to SLC Format

When converting files to SLC format, it is recommended that you set a layer
thickness of 15 microns (0.015 mm). Since SLC files cannot be orientated in
Objet Studio, it is important that models are properly orientated before being
saved as SLC files. Considerations for suitable model orientation are explained
in "Manual Positioning" in Chapter 3 on page 5-22.
DOC-34025 Rev. I
®
).
Technology.
From CAD to Objet Studio Workflow for
3 Introducing the 3D Printer
3-9