MCi Crusader II 1989 Maintenance Manual page 93

Date
1-1-89
Page~-__
s-_20 _ _
MC-9 MAINTENANCE MANUAL
DRIVER'S WINDOW ASSEMBLY
A single glazed, fixed, one-piece driver's window is pro-
vided with anodized aluminum frame (figure 3-14). A small
sliding section for signaling and mirror adjustment is provided
at the lower rear corner.
The driver's window is removed by first removing all screws
from the interior retaining frame. Then remove the glass from
the rubber retainer.
NOTE: During removal and installation of
the driver's window, care should be taken
to ensure proper placement of all window
components.
Figure 3-14. Driver's Window Assembly.
1. Front Frame Ra i 1
2.Rear Frame Rail
3,Curved Inside Frame Rail
4.Curved Sliding Rail
5.Bottom Sliding Rail
6.Side Sliding
Rail
].Top Stationary Rail
8.Bottom Stationary Rail
9.Rear Side Stationary Rail
10,Front Side Stationary Rail
11.Main Unit Rubber Glazing
12,Slider Rubber Glazing
13.Stationary Rubber Glazing
14.Front Rubber Seal
TS.Side Rubber Seal
16.Curved Weatherstrip
17.Bottom Weatherstrip
18.Side Weatherstrip
19.Top
&
Bottom Heatherstrip
20.\-/eatherstrip
21.Top
&
Bottom Felt
22.Sash Stop
23.Nylon Wear Plate
24.Nylon ~/ear Shoe
25.Sl iding Glass Unit
26.Stationary Glass Unit
27.Glass Unit
28,Sash Lock Keeper
29.Driver's Sliding Sash Lock
30. Driver's .
~Ii
ndow Rubber Sea I