MCi Crusader II 1989 Maintenance Manual page 434

Date
1-1-89
Page ___
,_3_-3_1 _ _
MC-9 MAINTENANCE MANUAL
•. Remove key and install 2nd speed gear washer. flat side up.
.ext groove of mainshaft Rotate washer to align splines of
washer with those of mainshaft and reinsert key (figure 13-118).
NOTE: The long key is moved downward to
engage washers as they are positioned on
mainshatt.
Figure 13-118. 2nd Speed Washer Installation.
5. Install spacer against 2nd speed washer (figure 13-119).
NOTE: Gear washers are internally splined
and locked to mainshaft by key. Gear spacers
are externally splined to engage with splines
in gear hubs. There is one washer and one
spacer for each gear in mainshaft assembly.
Figure 13-119. Spacer Against 2nd Speed Washer.
6. Install 2nd speed gear. clutching teeth down. Engage clutch-
ing teeth of gear with external splines of spacer (figure 13-120).
Pit
! X -
r.,
I·.,,,,,....,.._.
Figure 13-120. 2nd Speed Gear Installation.
7. Install 1st speed gear. clutching teeth up (figure 13-121).
Figure 13-121. 1st Speed Gear Installation.