MCi Crusader II 1989 Maintenance Manual page 334

Date
1-1-89
Page·-. __
10_-4 _ _
MC-9 MAINTENANCE MANUAL
SERVICE INTERVAL C - Every 300 hrs or 10,000 miles (16,000 km).
ITEM NUMBER* DESCRIPTION
23 Engine Crankcase
24 Engine Oil Filter
25 Shutterstat Air Filter
Service Door Hinges
44 Fuel Filters
26 Entrance Door Linkage
(remove panel for access
behind target panel)
&
Door Air Lock Mechanism
45 Entrance Door Hinges
LUBE METHOD
Drain, Fill
Change
Add
Apply
Change
Apply
Apply
SERVICE INTERVAL D - Every 750 hrs or 25,000 miles (40,000 km).
27
15
Brake Anchor Pins
(Caution: Do not overlubricate.)
Differential
4 Zerks (2 ea. side)
Drain.Fill
LUBRICANT**
0-1
(SAE
30 or 40)
F-2
L-3
0-2
L-3
L-5
G-1 (Below 0°F/-18°C)
G-S (Above 0°Ft-18°C)
SERVICE INTERVAL E - Every 1,500 hrs or 50,000 miles (80,000 km).
Air Cylinders - various locations Remove air lines
0-1 (SAE 30)
and apply
29
AIC Compressor Air Cylinder Apply
0-1 (SAE 30)
30 Blower Air Cylinder Apply 0-1 (SAE 30)
31
Steering Column
2 Zerks L-5
32 Baggage Door and Side Apply 0-2
Service Door Locks
33 Transmission Oil Filter Replace Element
34 Condenser Door and Check Strap Apply
0-2
35
Fuel Tank Door Apply
0-2
36 Battery Door and Catch Apply
0-2
42 Transmission (standard)
Drain. Flush. Refill 0-1 (SAE 30 Below 10°F /-12°C)
0-1 (SAE 40 or 50 Above 10°F/-12°C)
SERVICE INTERVAL F - Every 2250 hrs or 75,000 miles (121,000 km). ·
3
37
Power Steering Reservoir Filter
Power Steering Line Filter
Air Suspension Filter
Replace Element
Replace Element
Replace Element
0-1 (SAE 10-W-40)
0-1 (SAE 10-W-40)
SERVICE INTERVAL G - Every 3,000 hrs or 100,000 miles (161,000 km); at each brake rebuild.
4 Wheel Bearings and Seals
* See Location Diagram, figure 10-3.
** See Lubricant Requirements Chart.
Inspect. Apply 0-1 (SAE 30)