MCi Crusader II 1989 Maintenance Manual page 418

Date
1-1-89
Page . ___
13_-1_s _ _
MC-9 MAINTENANCE MANUAL
3. Remove the long key retaining snap ring from slot near
rear of mainshaft (figure 13-55).
Figure 13-55. Retaining Ring Removal.
10. Remove the reverse gear spacer (figure 13-56).
Figure 13-56. Removing Reverse Gear Spacer.
11. Pull the long key from mainshaft (figure 13-57).
Figure 13-57. Long Key Removal.
12. Rotate reverse gear limit washer to align its splines with
those of the mainshaft and remove washer (figure 13-58).
Figure 13-58. Removing Limit Washer.
13. Remove 1st-reverse sliding clutch from main shaft (fig-
ure 13-59).
Figure 13-59. Removing 1st Reverse Sliding Clutch.
14. With a small screwdriver, rotate the 1st speed gear limit
washer. recessed within the gear hub. to align its splines with
those of the mainshaft (figure 13-60).
Figure 13-60. Aligning Washer Splines.