MCi Crusader II 1989 Maintenance Manual page 431

Date
Page·_. __
13_-2_s _ _
MC-9 MAINTENANCE MANUAL
10. Insert the drive shaft from inside case through front bore.
Seat the drive gear bearing in case bore and move assembly
forward until retaining ring groove in bearing is exposed (figure
13-105).
Figure 13-105. Installing Drive Gear Assembly.
11. Install retaining ring (figure 13-106).
Figure 13-106. Installing Retaining Ring.
12. Seat bearing in case bore and install the drive gear
bearing cover with new gasket, aligning oil return slot in cover
with oil return bore in case. Tighten capscrews securely (figure
13-107).
Figure 13-107. Installing Drive Gear Bearing Cover.
COMPLETED INSTALLATION OF
LEFT COUNTERSHAFT ASSEMBLY
1. Insert countershaft support tool in rear bearing bore (fig-
ure 13-108).
Figure 13-108. Supporting Countershaft.