MCi Crusader II 1989 Maintenance Manual page 169

Date 1-1-89
Page·
~--4_-3_9 _ _
MC-9 MAINTENANCE MANUAL
5. Slide oil filter separator over tHe cartridge bolt with the
gasket surface next to the shell, figure 4-49.
6. Install the bolt with the oil separator into the bottom of the
shell and through center hole of the perforated plate in the
bottom of the shell. See figure 4-50,
Figure 4-49. Oil Filter Separator Installation.
Figure 4-50. Installing Bolt With Separator Into Shell.
7. Pour the entire package of desiccant material into the
shell, making sure none is lost. Handle carefully so that the bolt
does not fall out. Refer to figure 4-51.
8. Level the desiccant material and install second perforated
plate felt cloth down. (Make sure the shoulder of the bolt is
centered and extends slightly above the top of the perforated
plate.) See figure
4-52.
►
· NOTE:
If
the shoulder of the bolt does not
extend above the perforated plate, tap the
side
of
the desiccant container.
Figure 4-51. Pouring Desiccant Into Shell.
Figure 4-52. Perforated Plate in Place.