Download Print this page

MCi Crusader II 1989 Maintenance Manual page 92

Advertisement

Date
1-1-89
Page ___
3-_19 _ _
MC-9 MAINTENANCE MANUAL
REAR WINDOW
A one-piece, color-impregnated, molded, reinforced fiber-
glass panel is riveted to the main structure. The panel is
insulated with a 2" (51 mm) fiberglass blanket
Sash assembly complete with hinge and retainer may be
removed by removing the screws attaching the hinge retainer
to the body.
DRIVER'S WINDOW
A single-glazed. fixed, one-piece, full-vision-type driver's
window is provided with anodized aluminum frame. A small
sliding section for signaling and mirror adjustment is provided
at the lower rear corner. An optional double-glazed. one-
piece driver's window with a small sliding section is also
available. Window glass is AS-2 laminated safety glass with a
9-inch mask applied to the top portion of the window.
NOTE: During removal and installation of
the driver's window, care should be taken
to ensure proper placement of all window
components. Weatherstripping, wear
plates, etc., are not shown in the assembly.
drawing, but their locations may be deter-
mined from the MC-9 Parts Manual.
WINDSHIELDS
DESCRIPTION
Two large curve9 windshields of AS-1 laminated safety
. glass provide an unmasked area of 43½"
x
26"
(1105 mm x 660 mm). They are interchangeable from either
side. The windshields are laced to a flange around the opening
by means of a one-piece black rubber extrusion and rubber
filler strip.
WINDSHIELD INSTALLATION
Winashield installation must be performed by more than
one person. refer to figure 3-13.
1. Apply butyl tape to lip of windshield frame opening.
2. Install weatherstrip into opening.
3. Apply Glass-Slip or equivalent into the weatherstrip
channel.
4. Using wooden or plastic tool, tuck glass into weatherstrip.
Begin at top corner of windshield post and work around.
5. Seal glass perimete, approximately 12" each direction
from each corner with E- 708C black (Protective Treatment,
Inc.) sealant or equivalent
6. Apply soap solution to the lacing and. using a windshield
lacing tool, install lacing into the groove.
-
WEATHER STRIP
_,.A_
FILLER
"1fi
HRIP
·
WINDSHIELD
CAP
Ii
Figure 3-13. Windshield Cross..;section.
d

Hide quick links:

Advertisement

loading

Related Products for MCi Crusader II 1989

This manual is also suitable for:

Mc-9 1989