Date
1-1-89'
Page _· __
1_3-4_0 _ _
MC-9 MAINTENANCE MANUAL
4. Secure flat keys with 5116" -24 x 1" capscrews and tighten
all capscrews in spacer ring evenly and securely. Install safety
wire (figure 13-155).
Figure 13-155. Tightening Capscrews.
5. Install outer bearing on output shaft, seating against shaft
shoulder (figure 13-156).
Figure 13-156. Installing Outer Bearing.
6. Install the output shaft bearing washer on shaft and against
bearing, chamfered LO. toward bearing (figure 13-157).
Figure 13-157. Output Bearing Washer Installation.
7. Install the spacer
on
shaft and against washer (figure
13-158).
Figure 13-158. Spacer Installation.