Ignition Switch; Handlebar Switches - Honda XR125LK Owner's Manual

dummyhead dummyhead

IGNITION SWITCH

INSPECTION
Remove the front visor (page 2-4).
Disconnect the ignition switch 2P connector [1].
Check for continuity between the connector terminals in
each switch position according to the chart (page 19-2).
REMOVAL/INSTALLATION
Disconnect the ignition switch connector (page 18-7).
Remove the two mounting bolts [1] and the ignition
switch [2].
Install the ignition switch in the reverse order of
removal.

HANDLEBAR SWITCHES

Remove the front visor (page 2-4).
Disconnect the right handlebar switch 6P connector [1].
Right handlebar
switch:
Disconnect the left handlebar switch 9P (Black)
Left handlebar
connector [2] and wire connector [3].
switch:
Check for continuity between the connector terminals in
each switch position according to the chart (page 19-2).
LIGHTS/METER/SWITCHES
[1]
[2]
[3] [2]
[1]
[1]
18-7