Figure 7-4 Removing The Side Panels - Sun Microsystems SPARCcenter 2000 Service Manual

7
7-6
3. Lift the panel up until free of the tabs at the top of the chassis.
Set the panel aside.
Figure 7-4 Removing the Side Panels
To replace a side panel:
1. Place the panel against the cabinet so the notches on the panel inside
align with tabs at the chassis top.
2. Lower the panel into place and allow it to hang flush against the chassis.
3. Tighten the two captive screws at the panel base.
SPARCcenter 2000/2000E Service Manual—June 1996
Panel notches
Chassis tab
s
Side panel
Captive screws