Sun Microsystems SPARCcenter 2000 Service Manual page 157

1. Disconnect the data cable from each of the drives.
See Section 9.7, "5 1/4-Inch Disk Drive," on page 9-26.
2. Remove any cable restraints that hold the harness to the chassis or other
cable assemblies.
3. At the back panel of the tray, remove the jackscrews that secure the I/O
connectors to the tray.
The connectors mount from the interior.
4. Remove the cable assembly.
SCSI data cable
Figure 7-47 SCSI Data Cable Harness Removal and Replacement
To replace the SCSI data cable harnesses, reverse the preceding instructions.
Major Subassemblies
7
Jackscrews
I/O connectors
SCSI data cable
7-51