Table of Contents
Advertisement
Power supply connection
LED status board connector
Fan tray connector
Power supply
Figure 7-50 SCSI DC Cable Harness Removal and Replacement
2. Remove any cable restraints that hold the harness to the chassis or other
cable assemblies.
3. Disconnect the DC cable harness from the three connectors at the power
supply.
Each of the connectors is secured with a locking tab. Press the tab to
disconnect the connectors from the supply.
Major Subassemblies
7
SCSI DC cable harness
7-55
Advertisement
Chapters
Table of Contents
Troubleshooting
