Table of Contents
Advertisement
Thumbscrews (2 places)
Screws (2 places)
Figure 7-15 Removing the EMI Box
Remove the Power Supply
1. Remove the breaker box from the power supply.
a. Remove two screws from the bottom lip of the box.
b. Loosen two captive thumbscrews at the top of the box.
c. Allow the box to drop free of the top power supply.
2. Remove four remaining screws securing the rear face of the power supply.
See Figure 7-16.
Major Subassemblies
7
Filter cable
7-15
Advertisement
Chapters
Table of Contents
Troubleshooting
