Sun Microsystems SPARCcenter 2000 Service Manual page 148

7
7.10.1 One-Piece Keyswitch Assembly
Front hinged panel
7-42
1. Unplug the key switch cable from the LED/key switch board.
See Figure 7-38.
keyswitch cable
Figure 7-38 One Piece Keyswitch — Disconnecting the cable
2. Remove the C-shaped retainer clip from the groove in the keyswitch body
at the backside of the panel.
See Figure 7-39.
3. Pull the keyswitch assembly through the panel hole from the front.
SPARCcenter 2000/2000E Service Manual—June 1996