Figure 11-2 Removing All Components From The Front Of The Sun Fire E6900 System; Figure 11-3 Removing The Bus Bar Access Panels - Sun Microsystems Fire E6900 Systems Service Manual

6. Remove all CPU/Memory boards, Repeater boards, I/O assemblies, System
Controller boards, and filler boards or filler panels from the front and rear of the
system (
FIGURE 11-2
Removing All Components From the Front of the Sun Fire E6900 System
FIGURE 11-2
7. Remove the ID board from the centerplane. See
Board From the Sun Fire E6900
8. Remove the bus bar access panels at the rear of the system.
Removing the Bus Bar Access Panels
FIGURE 11-3
).
System", Step 5.
Section 11.3.1 "Removing the ID
Chapter 11 Centerplane and ID Boards 11-3