Install The Plastic Side Panels - Sun Microsystems Enterprise 250 Conversion Manual

Installing the Plastic Side Panels
1. Install the plastic side panel that covers the lower-right side of the chassis.
a. Align the hooks on the inside surface of the panel with the corresponding
holes in the chassis.
b. Slide the panel down and into place.
2. Install the plastic side panel that covers the upper-right side of the chassis, as
shown in the next figure.
a. Insert the hooks on the underside of the panel into the corresponding slots in
the chassis.
b. Slide the panel toward the front of the system until the hooks engage the
chassis and the rear edge of the panel snaps into place.
Press along the bottom edge of the panel to guide it into place.
How to Convert a Rackmount Server to a Deskside Server 1-11