Figure 9-8 Attaching The Mounting Brackets To The Cd-Rom Drive - Sun Microsystems SPARCcenter 2000 Service Manual

Use only the middle holes
Figure 9-8 Attaching the Mounting Brackets to the CD-ROM Drive
5. Position the ground strap against the outer surface of a mounting bracket
and align hole in the ground strap with the proper hole on the bracket.
6. Secure the mounting brackets to the sides of the CD-ROM drive.
Use two Phillips screws for each mounting bracket.
7. Position the drive assembly so that it will be installed in the lower right
drive bay in the SPARCcenter 2000 system cabinet. See Figure 9-9.
Storage Devices
SunCD Plus4
9
9-7