Ground (blade
connector)
F. GND
Ground (blade
connector)
Figure 9-6
4. Place the CD-ROM drive between the lower halves of the mounting
Storage Devices
ID select
0 1 2
Parity
Prevent / Allow
Test
L GND R
0 1 2
INTERFACE CONNECTOR
AUDIO OUT
TEST MODE
PREVENT/ALLOW
ID SELECT
PARITY
SunCD 2Plus
Location of ID SELECT Pins
brackets. See Figure 9-7.
The front of the drive should be flush with the short portion of the brackets
that face outward and away from the sides of the drive.
SunCD or SunCD Plus
ID select
Parity
Prevent / Allow
4 2 1
9
DC input
12V±10%
GND
5V±5%
DC INPUT
Test
DC input
Term power
9-5