7.1 Outer Cover Reference Guide
Internal Access
This chapter provides information necessary to prepare the system for service
after the system has been powered off.
The SPARCcenter 2000 system cabinet outer panels, shown in Figure 7-1
through Figure 7-7, consist of the following parts:
•
Hinged door
•
Three vented front panels
•
Rear screen panel
•
Two side panels
•
Power supply panel
•
Power supply compartment cover
•
Kick panel
•
Stabilizer bar
Use Table 7-1 as a guide in determining which panels will need to be removed
to access replaceable parts for the SPARCcenter 2000 system cabinet.
7
7-1