Sun Microsystems SPARCcenter 2000 Service Manual page 319

R
rear screen panel See panel, remove
related documentation, xxv
remove
AC distribution unit, 8-46
backplane, 8-33
blower assembly, 8-44
control board, 8-32
drive, differential SCSI disk tray, 9-26
fan tray, 8-49
panel
EMI, 8-1
hinged front, open, 7-2
kick, 7-9
power supply cover, 7-7
rear screen, 7-4
side, 7-5
vented front, 7-3
power supply, 8-3
disk tray, 8-56
SCSI
disk tray, 8-47
disk drive, 9-27
power supply, 8-56
internal tray, 8-38
tape drive
4 mm auto-loader, 9-18
8 mm
full-height, 9-10
half-height, 9-13
SunCD, SunCD Plus, SunCD
2Plus drive, 9-2
system board, 8-30, 11-1
replace
AC distribution unit, 8-47
backplane, 8-38
blower assembly, 8-45
fan tray, 8-50
panel
EMI, 8-2
kick, 7-9
power supply cover, 7-7
rear screen, 7-5
side, 7-6
vented front, 7-4
parts
list, 12-2
location, 10-4
power supply, 8-7, 8-17, 8-25
SCSI
disk tray
disk drive, 9-30
power supply, 8-56
tape drive
4 mm auto-loader, 9-22
8 mm
half-height, 9-15
SunCD, SunCD Plus, SunCD
2Plus drive, 9-4
SIMMs, 3-19
system board, 8-31, 11-2
reset
switch, initiate POST, 6-7
watchdog, 3-17
restart
POST, 6-7
system, 6-5
S
safety precautions, 5-1
SBus
cabling
worksheet, 6-4
card
fault, 4-7
filler panel, 11-10
remove and replace, 11-6 to 11-10
retainer, 11-8
system board capacity, E-6
test manually, 6-7
connector pinout, D-4
SCSI
address
determine, 9-25
Index-5